人丝氨酸蛋白酶抑制剂B3基因的生物信息学分析

人丝氨酸蛋白酶抑制剂B3 SERPINB3能抑制半胱氨酸蛋白酶,具有抗细胞调亡、促进细胞增殖和迁移作用,且与许多肿瘤的发生与发展密切相关.通过基因电子克隆(in silico cloning)获得SERPINB3基因全长cDNA序列(1779 bp),编码由390个氨基酸组成的蛋白质.核酸序列分析表明:SERPINB3基因位于人体18号染色体长臂(18q21.33),基因组跨越80373285 bp,含有个16外显子,15个内含子,其cDNA序列上总共有45个酶切位点.SERPINB基因核酸序列同源性分析显示,人类与黑猩猩的亲缘关系较近,与白眉猴和猕猴的亲缘关系是最远.SERPINB3蛋白序列同源性分析显示,人类和黑猩猩亲缘关系较近,和苍疣猴亲缘关系较远.SERPINB3相互作用蛋白的生物信息学分析表明:与SERPINB3相互作用的蛋白中,以丝氨酸蛋白酶家族成员居多,且大多在调节炎症反应、细胞增殖分化以及凋亡等方面起着关键作用.本论文通过对SERPINB3基因的生物信息学分析,为SERPINB3的功能和分子进化研究提供更多的生物信息学参考.     

图的某些特殊性质的谱条件

图的邻接矩阵的最大特征值被称为图的谱半径,它是分析图的结构性质的重要概念.图的不同性质具有相应的稳定性,进行闭包运算得到相应闭包,对闭包补图的结构进行恰当分类,得出当补图谱半径小于等于某个数时,给定大的最小度的图G是s-哈密尔顿-连通图、S-泛圈图或α(G)≤s的充分条件.这为研究图的某些性质提供了一种全新的方法.     

Superior corrosion resistance-dependent laser energy density in(CoCrFeNi)95Nb5 high entropy alloy coating fabricated by laser cladding

(CoCrFeNi)95Nb5 high entropy alloy(HEA)coatings were successfully fabricated on a substrate of Q235 steel by laser cladding technology.These(CoCrFeNi)95Nb5 HEA coatings possess excellent properties,particularly corrosion resistance,which is clearly superior to that of some typical bulk HEA and common engineering alloys.In order to obtain appropriate laser cladding preparation process parameters,the effects of laser energy density on the microstructure,microhardness,and corrosion resistance of(CoCrFeNi)95Nb5 HEA coating were closely studied.Results showed that as the laser energy density increases,precipitation of the Laves phase in(CoCrFeNi)95Nb5 HEA coating gradually decreases,and diffusion of the Fe element in the substrate intensifies,affecting the integrity of the(CoCrFeNi)95Nb5 HEA.This decreases the microhardness of(CoCrFeNi)95Nb5 HEA coatings.Moreover,the relative content of Cr2O3,Cr(OH)3,and Nb2O5 in the surface passive film of the coating decreases with increasing energy density,causing corrosion resistance to decrease.This study demonstrates the controllability of a high-performance HEA coating using laser cladding technology,which has significance for the laser cladding preparation of other CoCrFeNi-system HEA coatings.     

人类卫生健康共同体视域下的全球科技合作研究——以新冠肺炎疫情为背景

新冠疫情暴发以来,中国政府和人民秉持人类命运共同体理念,运用一系列先进技术,在较短时间内扭转了国内疫情的严峻形势.在此背景下,为了更好地发挥中国方案在全球抗疫中的作用,文章运用内容分析法和归纳分析法,首先梳理了从人类命运共同体到人类卫生健康共同体的理论逻辑,其次探究了人类卫生健康共同体、全球科技合作与疫情防控之间的结构关系,最后分析了中国疫情防控的有效举措,进而得出结论:中国疫情防控工作的成效离不开人类命运共同体理念的指引和全球科技合作的开展,而中国在平台建设、机制整合及合作网络等领域的方案共享将有助于遏制全球疫情的蔓延.     

低氧LiF–NdF3熔盐体系阳极过程的电化学行为研究

The oxidation of oxygen ions and the generation of an anode effect at a low oxygen content of 150 mg/kg were discussed in this paper. Cyclic voltammetry and square-wave voltammetry tests were conducted to explore the anodic processes of LiF–NdF₃ melt after a lengthy period of pre-electrolysis purification at 1000°C (during which the oxygen content reduced from 413 to 150 mg/kg). The oxidation process of oxygen ions was found to have two stages: oxidation product adsorption and CO/CO₂ gas evolution. The adsorption stage was controlled by diffusion, whereas the gas evolution was controlled by the electrochemical reaction. In comparison with oxygen content of 413 mg/kg, the decrease in the amplitude of the current at low oxygen content of 150 mg/kg was much gentler during the forward scanning process when the anode effect occurred. Fluorine-ion oxidation peaks that occurred at about 4.2 V vs. Li/Li+ could be clearly observed in the reverse scanning processes, in which fluorine ions were oxidized and perfluorocarbons were produced, which resulted in an anode effect.     

基于自适应变异PSO-SVM的APU性能参数预测模型

为提高辅助动力装置(auxiliary power unit, APU)性能参数预测的精度,针对支持向量机(support vector machine, SVM)模型在实际使用中遇到的参数选择问题,采用自适应变异粒子群优化(particle swarm optimization, PSO)算法实现对SVM惩罚参数和核参数的优化选择,提出一种基于自适应变异PSO算法优化SVM的APU性能参数预测模型。进一步分析了预测模型不同预测步长对短期预测精度的影响。利用某型APU性能参数数据进行了验证,并与多种预测模型进行了对比实验。实验结果表明,对于排气温度(exhaust gas temperature, EGT)的预测,自适应变异PSO-SVM模型的平均绝对百分比误差(mean absolute percentage error, MAPE)比标准PSO-SVM模型低47%;对于滑油温度(oil temperrature, OT)的预测,自适应变异PSO-SVM模型的MAPE比标准PSO-SVM低29%,为短期APU性能变化趋势预测提供了一定的参考。     

Heusler合金Fe_2VAl的晶体结构与热电性能研究

采用真空电弧熔炼和放电等离子烧结技术制备了Full-Heusler合金Fe_2VAl,利用XRD、XPS对合金的物相结构与成分进行表征,在300～800K温度区间内测试了合金的Seebeck系数、电阻率、热导率等热电参数,并将实验结果与基于L2_1有序结构Fe_2VAl合金的模拟计算值进行了比较。结果表明,实验所制的合金样品中Fe、Al、V原子比接近于2∶1∶1,基本满足Fe_2VAl合金的成分配比;结合XRD衍射谱及10K下合金的饱和磁矩可知,所制合金样品中除了完全有序的L2_1结构相外,还存在部分的B2相。另一方面,基于热电性能测试结果可知,所制Fe_2VAl合金表现出典型的n型半导体特性,其Seebeck系数和电阻率随着温度的升高而降低,这与利用VASP和BoltzTraP软件包结合计算得到的L2_1结构Fe_2VAl合金的热电参数随温度(300～800K)的变化趋势相符合;合金的热导率随着温度的升高呈先降低后升高的趋势,在500K附近具有极小值,而无量纲参数热电优值ZT在500K附近达到最大值,约为0.052。     

基于功能化的纳米锐钛矿TiO2膜修饰电极的乌药醚内酯电化学传感器及其应用研究

将功能化的纳米锐钛矿TiO_2(介笼结构)修饰电极作为乌药醚内酯电化学传感器的氧化还原探针,实现电化学方法检测乌药醚内酯。实验优化了电极修饰液用量、支持电解质和仪器参数等条件。在最优化的条件下,乌药醚内酯的线性范围为0.1～20μg/mL,检测限为0.058μg/m L。将所建立的电化学新方法应用于乌药中乌药醚内酯类的含量测定及药材真伪的鉴定,测得其平均含量为0.303 mg/g,并实现乌药与其伪品荆三棱药材的快速鉴别。     

Effects of Strain Rate,Temperature and Grain Size on the Mechanical Properties and Microstructure Evolutions of Polycrystalline Nickel Nanowires: A Molecular Dynamics Simulation

Through molecular dynamics(MD)simulation,the dependencies of temperature,grain size and strain rate on the mechanical properties were studied.The simulation results demonstrated that the strain rate from 0.05 to 2 ns~(–1 )affected the Young’s modulus of nickel nanowires slightly,whereas the yield stress increased.The Young’s modulus decreased approximately linearly;however,the yield stress firstly increased and subsequently dropped as the temperature increased.The Young’s modulus and yield stress increased as the mean grain size increased from 2.66 to6.72 nm.Moreover,certain efforts have been made in the microstructure evolution with mechanical properties association under uniaxial tension.Certain phenomena such as the formation of twin structures,which were found in nanowires with larger grain size at higher strain rate and lower temperature,as well as the movement of grain boundaries and dislocation,were detected and discussed in detail.The results demonstrated that the plastic deformation was mainly accommodated by the motion of grain boundaries for smaller grain size.However,for larger grain size,the formations of stacking faults and twins were the main mechanisms of plastic deformation in the polycrystalline nickel nanowire.     

Quantitative Analysis of Multi-Recovery-Based Intrusion Tolerance Model

Quantitative analysis has always been a difficult problem in security analysis of intrusion tolerance systems. An intrusion tolerance model based on multiple recovery mechanisms is introduced in this paper and how to quantify the security attributes of the model is proposed. A state transition model with recovery states more accurately describes the dynamic behavior of the system. Considering that recovery mechanisms have a great impact on the security performance of the system, we set up the cost models corresponding to different recovery mechanisms. We propose a feasible security measure based on mean cost to security failure in order to evaluate the system cost during the recovery phase. The experimental results confirmed the feasibility of the proposed methods.